Aqueous release agents

To formulate aqueous (mold) release agents for market segments like die casting metal, PU-foam, concrete, bitume and further more, different ULTRALUBE^® wax additives are available. These types are specialized regarding to the particular release application and are based from low melting paraffines up to high melting HDPE- or amide waxes.

ULTRALUBE^® product finder

Reset

Technical data

Wax type

Technical data

Product type

Ionic character

table-selektor-28

Name	wax type	solids content	melting range	pH-value	ionic character	Info
E-389	PE/paraffin	30%	118 °C	9.0	N/A	general purposes
E-390	PE/paraffin	40%	85 °C	10.0	N/A	general purposes
E-699	compound	20%	56-80 °C	9.0	N	preparation of relase agent
E-660	mod. PP	35%	150 °C	6.5	N/A	die cast metal
E-663 A	PP	40%	154 °C	6.5	N/A	die cast metal
E-665 A	PP	40%	154 °C	7.5	N/A	die cast metal
E-702 N	mod. PE	36%	100-115 °C	9.5	N	die cast metal
E-705	sil. mod. ester wax	40%	70 °C	6.0	N	release agent for PU-foam
E-7098	mod. ester wax	30%	65 °C	8.5	N	die cast metal, anit caking in hotmelt
E-842 N	HDPE	42%	125 °C	6.5	N	die cast metal
E-846 A	HDPE	40%	138 °C	6.5	N/A	die cast metal
E-1088	HDPE	30%	125 °C	5.5	N	preparation of metal working fluids
SE-112	PDMS-mod. wax	55%	n.a.	7.0	N	silicone emulsion for die cast metal
T-221/40	paraffin	40%	40-60 °C	9.5	N/A	release between wood, steel, plastic moulds against concrete
D-840	amide	35%	142 °C	6.5	N	die cast metal, PU-foam (bitume foils)
D-8400	mod. ester / amide wax	50%	65-144 °C	7.5	N	die cast metal
MD-2040	amide	30%	142 °C	7.5	N	die cast metal, PU-foam (bitume foils)

N = non ionic, A = anionic, C = cationic, + = yes, – = no, n.a. = non applicable

These data are to be seen as typical and should not be considered as specifications.

types for use in:

Aqueous release agents

ULTRALUBE® product finder

Technical data

Technical data

table-selektor-28

ULTRALUBE^® product finder